Product News

Lump breaker conditions materials for downstream processing or conveying

Offers high throughput rates with minimal heat generation

The Munson RDC-2424-MS De-Clumper rotary lump breaker breaks chunks of agglomerated abrasive or friable materials that have compacted during storage or shipment. Material entering the 24-in.-square inlet is reduced in size by dual rotors with three-point, single-piece, abrasion-resistant steel breaking heads rotating above a curved, perforated bed screen. On-size material exits through 1-in. diameter apertures in the bed screen. Powered by a 7.5 HP motor with gear reducer, plus a chain and sprocket drive, the synchronized shafts rotate at approximately 120 rpm. The lump breaker is available in 304/316 stainless steel, finished to sanitary standards for food and dairy applications.

Learn more about size reduction equipment at PACK EXPO Las Vegas, September 23–25, 2019 at the Las Vegas Convention Center. Register by August 30 to save 70%.

Companies in this article

Joyce's Voice Newsletter

Subscribe now to receive Joyce Fassl’s weekly e-newsletter focusing on the industry’s most pressing manufacturing and operations stories.