Minarik MDBL Series drives control brushless motors from 90 VDC to 280 VDC, up to 5 amps/1.5 HP, using 115 VAC or 230 VAC line sources. On-board trim pots allow operators to set minimum/maximum speeds, acceleration/deceleration rates, motoring and regening current limits. The onboard 16-bit microcontroller comes ready for mission-specific configurations. Designed for feedback from 120-deg hall effect sensors, the thermally protected drives are UL 61800-5-1 listed.
Learn more about drives and motors at PACK EXPO Las Vegas, September 23–25, 2019 at the Las Vegas Convention Center. Register by August 30 to save 70%.
Companies in this article