Bio-Inspired Retrofit May Save Manufacturers Millions of Gallons of Water Annually
Namib desert beetles capture water droplets from fog. To fight water scarcity, an MIT-spinoff uses the same concept to capture and recycle vapor from cooling tower plumes, saving water and cutting costs in manufacturing facilities.
Infinite Cooling developed an add-on process to capture cooling tower plumes’ water.
As companies take aim at sustainability beyond recycling, reduction in water usage is a key KPI particularly as droughts and wildfires threaten so many states.
According to MIT-spinoff Infinite Cooling, “40% of all water used in the U.S. is in manufacturing sites and power plants. Much of this water leaves the facilities via high density water vapor from industrial cooling towers.”
Infinite Cooling was one of 10 nature-inspired startups selected as finalists in the Biomimicry Institute’s 2021 Ray of Hope Prize. Namib desert beetles put their heads down and angle their wing scales vertically into the flow of desert fog. Water droplets aggregate on bumps on their wings, and run down troughs between the bumps so the insects can drink. (Image credit: Biomimicry Institute)
Taking cues from animals’ enhanced fog harvesting strategies such as Namib desert beetles, the company developed an add-on process to capture cooling tower plumes’ water. With groundwater scarce, Namib desert beetles put their heads down and angle their wing scales vertically into the flow of desert fog. Water droplets aggregate on bumps on their wings, and run down troughs between the bumps.
Infinite Cooling’s WaterPanel™ uses electrodes to ionize air and charge droplets, then collect them via an electrostatic mesh on top of a cooling tower exhaust. The droplets fall down via gravity into trays below.
This can save industrial facilities money, while saving hundreds of millions of gallons of water, depending on the application. This is applicable to cooling towers in pharmaceutical manufacturing, at CPGs, and in food production—and it can be retrofitted to existing towers.
This will hopefully alleviate some strain on local waterways, minimize costs, and increase safety in communities surrounding these facilities.
WaterPanel was installed onMIT’s Nuclear Reactor Laboratory research facility for stringent, 24/7 testing. The technology has to be sturdy enough to withstand heat, vibration, and extreme weather such as a harsh winters and summers, as MIT’s David Chandler explained.
According to chief technology officer Karim Khalil PhD, water collected in these tests was 100 times cleaner than the incoming cooling water. Water contamination can be measured by testing conductivity, and plant cooling water tends to measure 3,000 microsiemens/cm. But water captured by WaterPanel typically measures under 50 microsiemens/cm as it is distilled in the process, cleaner than the average water supply in Cambridge that usually measures 500 to 600 microsiemens/cm.
So what’s next for Infinite Cooling? In June 2021, they closed over $12 million in Series A financing. The system is now being prepared for full-scale tests in a commercial power plant and in a chemical processing plant. The company has signed three contracts with industrial facilities across the U.S.
PACK EXPO Las Vegas and Healthcare Packaging EXPO (Sept. 27-29, Las Vegas Convention Center) will reunite the packaging and processing community. With over 1400 exhibitors, no other event in 2021 will bring together a more comprehensive gathering of suppliers offering new products, technologies and solutions. Attendee registration is now open.
Discover cutting-edge packaging and processing solutions in the inaugural Packaging World/ProFood World Innovations Report. From high-speed filling machines to mono-material lids, see how the latest advancements from PACK EXPO International 2024 are driving safety, sustainability, and extended shelf life—shaping the future of dairy food and beverage packaging.
See how leading manufacturers are fast-tracking projects despite economic uncertainty. Get proven tactics for overcoming tariffs, labor shortages, and rising costs.
Namib desert beetles put their heads down and angle their wing scales vertically into the flow of desert fog. Water droplets aggregate on bumps on their wings, and run down troughs between the bumps so the insects can drink. (Image credit: Biomimicry Institute)
